TEKCN 13-Piece FTTH Fiber Optic Tool Kit – Fiber Cleaver, Optical Power Meter, 1mW 5km VFL & Wire Stripper
The TEKCN 13-Piece FTTH Fiber Optic Tool Kit is a compact, all-in-one solution for fiber optic technicians who need to terminate, test, and verify fiber connections in the field. In a single portable kit, you get a fiber cleaver, a calibrated optical power meter (−70 to +10dBm, InGaAs detector), a 1mW 5km visual fault locator (VFL), a fiber optic wire stripper, and essential cleaning supplies — everything required for FTTH fast connector termination and fiber link verification without carrying multiple separate instruments.
Ideal for FTTH installers, telecom contractors, and field technicians who need a lightweight, self-contained kit for residential and commercial fiber drop cable termination.
What’s Included – 13-Piece Kit Contents
| # | Item | Qty |
|---|---|---|
| 1 | Optical Power Meter (−70~+10dBm, InGaAs, 800–1700nm) | 1 pc |
| 2 | Visual Fault Locator (VFL) – 1mW, 5km range, 650nm | 1 pc |
| 3 | Fiber Cleaver | 1 pc |
| 4 | Fiber Optic Wire Stripper | 1 pc |
| 5 | Alcohol Bottle | 1 pc |
| 6 | Dust-Free Cleaning Cloth / Wipers | 1 pack |
| 7 | Carrying Bag / Case | 1 pc |
Optical Power Meter – Key Specifications
| Parameter | Specification |
|---|---|
| Measurement Range | −70 to +10 dBm |
| Detector Type | InGaAs |
| Wavelength Range | 800 – 1700nm |
| Calibrated Wavelengths | 850, 980, 1300, 1310, 1490, 1550nm |
| Measurement Uncertainty | ±0.2dB (5%) |
| Resolution (Linear) | 0.1% |
| Resolution (Logarithmic) | 0.01dBm |
| Optical Connector | FC / Universal 2.5mm adapter |
| Operating Temperature | −10°C to +60°C |
| Storage Temperature | −25°C to +70°C |
| Relative Humidity | 0 – 95% (non-condensing) |
Visual Fault Locator (VFL) – Key Specifications
| Parameter | Specification |
|---|---|
| Output Power | 1mW (0dBm) |
| Test Range | 3 – 5km |
| Wavelength | 650nm (visible red) |
| Connector | FC / Universal 2.5mm adapter |
Why Choose This TEKCN 13-Piece Kit?
- Fiber Cleaver Included: Achieve clean, low-angle fiber end-faces required for low-loss fast connector termination — the most critical step in field termination quality. Most compact kits at this price point omit the cleaver.
- Calibrated Optical Power Meter (−70~+10dBm): Wide dynamic range InGaAs detector calibrated at 6 standard wavelengths (850, 980, 1300, 1310, 1490, 1550nm) — suitable for both multimode and singlemode fiber testing.
- 1mW 5km VFL: Locate fiber breaks, sharp bends, and faulty connectors visually up to 5km — the fastest troubleshooting tool for FTTH drop cable faults.
- Fiber Optic Wire Stripper: Precisely strips fiber coating without nicking the glass — essential for clean cleaves and low-loss splices or fast connector terminations.
- Complete Cleaning Supplies: Alcohol bottle and dust-free wipers for fiber end-face cleaning before connector insertion — dirty end-faces are the most common cause of high insertion loss.
- Compact & Portable: All 13 items fit in a single carrying bag — lightweight and easy to carry on FTTH residential installation routes.
- FC / Universal 2.5mm Connector: Power meter and VFL both use the universal 2.5mm adapter, compatible with FC, SC, and ST connectors — the most common connector types in FTTH networks.
Complete FTTH Fast Connector Termination Workflow
This kit supports the full field termination and verification workflow for FTTH drop cables with fast connectors:
- Step 1 – Strip: Use the fiber optic wire stripper to remove the fiber coating from the cleaved end
- Step 2 – Clean: Wipe the stripped fiber with IPA alcohol and a dust-free wiper to remove all contamination
- Step 3 – Cleave: Use the fiber cleaver to achieve a clean, low-angle end-face on the stripped fiber
- Step 4 – Terminate: Insert the cleaved fiber into the fast connector body
- Step 5 – Verify continuity: Use the 1mW VFL to confirm fiber continuity and locate any breaks or bends
- Step 6 – Measure power: Use the optical power meter to measure received power and confirm the link meets the operator’s loss budget
How This Kit Compares to Larger FTTH Tool Kits
The TEKCN 13-piece kit is optimized for technicians who primarily do fast connector termination and need the core test instruments (power meter + VFL) without the full hand tool set. For technicians who also need pliers, cable cutters, Kevlar scissors, and a drop cable stripper, consider the TEKCN HSV-202 — our 18-piece complete FTTH termination kit that includes all hand tools plus the same test instruments.
Ideal Applications
- FTTH / FTTx residential installation — fast connector termination of fiber drop cables at the subscriber premises
- Telecom last-mile fiber deployment — compact kit for technicians working on high-volume residential FTTH rollouts
- Fiber optic maintenance and troubleshooting — VFL and power meter for rapid fault location and link verification
- Enterprise and SMB fiber installation — fast connector termination for structured cabling in offices and commercial buildings
- Fiber optic training — complete termination and testing workflow in a single compact kit for training programs
Frequently Asked Questions
Q: What is included in the TEKCN 13-piece FTTH fiber optic tool kit?
A: The kit includes an optical power meter (−70~+10dBm, InGaAs, 800–1700nm), a 1mW 5km visual fault locator (VFL), a fiber cleaver, a fiber optic wire stripper, an alcohol bottle, dust-free cleaning wipers, and a carrying bag.
Q: What is the measurement range of the optical power meter in this kit?
A: The optical power meter measures from −70 to +10dBm using an InGaAs detector across 800–1700nm, calibrated at 850, 980, 1300, 1310, 1490, and 1550nm. It is suitable for both multimode and singlemode fiber testing.
Q: What is the VFL range in this kit?
A: The visual fault locator (VFL) outputs 1mW at 650nm with a test range of 3–5km, suitable for locating fiber breaks, sharp bends, and faulty connectors in FTTH drop cables.
Q: Does this kit include a fiber cleaver?
A: Yes. The kit includes a fiber cleaver for achieving clean, low-angle fiber end-faces required for low-loss fast connector termination in the field.
Q: What connector type does the power meter use?
A: The power meter uses an FC / Universal 2.5mm adapter, compatible with FC, SC, and ST connectors — the most common connector types in FTTH and telecom networks.
Q: Is this kit suitable for fast connector termination?
A: Yes. The kit includes a fiber cleaver, fiber optic wire stripper, alcohol bottle, and dust-free wipers — all the tools required for FTTH fast connector termination. The VFL and power meter allow you to verify the terminated link immediately after installation.
Q: How does this kit differ from the TEKCN HSV-202?
A: This 13-piece kit is a compact set focused on fast connector termination and testing. The HSV-202 is an 18-piece kit that adds a full hand tool set (pliers, cable cutters, Kevlar scissors, drop cable stripper) for technicians who also need to prepare and open fiber cables. Choose this kit for lightweight portability; choose the HSV-202 for a complete all-in-one solution.
Q: What wavelengths is the power meter calibrated for?
A: The power meter is calibrated for 850, 980, 1300, 1310, 1490, and 1550nm — covering all standard multimode and singlemode telecom wavelengths used in FTTH, CATV, and enterprise fiber networks.
Package Contents
- Optical Power Meter (−70~+10dBm, InGaAs, 800–1700nm) ×1
- Visual Fault Locator – 1mW, 5km, 650nm ×1
- Fiber Cleaver ×1
- Fiber Optic Wire Stripper ×1
- Alcohol Bottle ×1
- Dust-Free Cleaning Wipers ×1 pack
- Carrying Bag ×1